AEROVIK Series of Rotary Screw Oil-injected Compressors
| SPECIFICATIONS | DESIGN | REFERENCES |
TECHNICAL DATA
- Capacity: up to 43.8 m3/min (2,628 Nm3/h)
- Discharge pressure: up to 1.3 MPa (13.2 bar)
- Drive power: up to 250 kW
COMPRESSIBLE GASES
APPLICATION
Compressor system
AEROVIK A4-6.3/9
The rotary screw compressors are volumetric machines, horizontal, single-stage, oil-injected, driven by an electric motor via flexible coupling. The compressor includes a casing, primary and secondary rotors, radial thrust bearings and seals.
Oil, being constantly injected into a working cavity during the compression process, performs several functions: filling the gaps between the rotors and the casing; cooling the gas during compression; lubricating the rotors in place of contact.
The basic models can be modified in accordance with the customer requirements.
DESIGN FEATURES AND ADVANTAGES
- Belt or a direct transmission from the electric motor
- Noise-reduction enclosure providing noise level no more than 77-80 dBA
- Microprocessor control system ensures reliable operation in the automatic mode and the necessary protection for safe operation. The compressor systems in intended for continuous operation with automatic transfer into the "Idle" mode (in the "Idle" mode the power consumption is up to 40% of nominal)
- Minimal footprint, easy installation in a convenient location, requiring no foundation
- Easily opened panels and wide openings allow convenient access to the serviceable parts and units
- Compressed air cleaning system provides residual oil content less than 5.10 mg/m3. Applicable lubrication oil is KP-8s TP-22s (other types shall be approved by Kazancompressormash)
INSTALLATION
- Versions for indoor installation
- Version for outdoor installation under a canopy or indoor installation with free air access
SCOPE OF SUPPLY
- Compressor system
- Vertical 2-stage oil separator/oil tank
- Oil and air filters
- Piping
- Valves
- Oil and gas coolers
- Control system
- Noise reduction enclosure
Model |
Compressible gas |
Capacity |
Pressure |
Drive |
Dimensions, meters |
Weight including |
Application |
||
Suction |
Discharge |
Type |
Power, kW |
||||||
Aerovik-250 |
Air |
28.5 |
0.1 |
1.3 |
El. motor |
250/340 |
1.90х2.30х1.94 |
5400 |
Supply of compressed air to mechanisms and systems |
Aerovik -200 |
Air |
23.6 |
0.1 |
1.3 |
El. motor |
200/270 |
1.90х2.30х1.94 |
4800 |
Supply of compressed air to mechanisms and systems |
Aerovik -160 |
Air |
19.7 |
0.1 |
1.3 |
El. motor |
160/220 |
1.90х2.30х1.94 |
3700 |
Supply of compressed air to mechanisms and systems |
Aerovik -132 |
Air |
16.2 |
0.1 |
1.3 |
El. motor |
132/180 |
1.42х1.96х2.12 |
2450 |
Supply of compressed air to mechanisms and systems |
Aerovik -110 |
Air |
14.0 |
0.1 |
1.3 |
El. motor |
110/150 |
1.42х1.96х2.12 |
2250 |
Supply of compressed air to mechanisms and systems |
Aerovik -90 |
Air |
11,2 |
0.1 |
1.3 |
El. motor |
90/125 |
1.42х1.96х2.12 |
1900 |
Supply of compressed air to mechanisms and systems |
Aerovik -75 |
Air |
8.8 |
0.1 |
1.3 |
El. motor |
75/100 |
1.16х1.67х1.80 |
1466 |
Supply of compressed air to mechanisms and systems |
Aerovik -55 |
Air |
7.0 |
0.1 |
1.3 |
El. motor |
55/75 |
1.16х1.67х1.80 |
1344 |
Supply of compressed air to mechanisms and systems |
Aerovik -45 |
Air |
5.7 |
0.1 |
1.3 |
El. motor |
45/60 |
0.89х1.33х1.70 |
818 |
Supply of compressed air to mechanisms and systems |
Aerovik -37 |
Air |
4.3 |
0.1 |
1.3 |
El. motor |
37/50 |
0.89х1.33х1.70 |
810 |
Supply of compressed air to mechanisms and systems |
Aerovik -30 |
Air |
3.85 |
0.1 |
1.3 |
El. motor |
30/40 |
0.85х1.21х1.56 |
648 |
Supply of compressed air to mechanisms and systems |
Aerovik -22 |
Air |
2.75 |
0.1 |
1.3 |
El. motor |
22/30 |
0.74х0.99х1.22 |
345 |
Supply of compressed air to mechanisms and systems |
Aerovik -18 |
Air |
2.2 |
0.1 |
1.3 |
El. motor |
18,5/25 |
0.74х0.99х1.22 |
340 |
Supply of compressed air to mechanisms and systems |
Aerovik -15 |
Air |
1.75 |
0.1 |
1.3 |
El. motor |
15/20 |
0.74х0.99х1.22 |
335 |
Supply of compressed air to mechanisms and systems |
Aerovik -11 |
Air |
1.1 |
0.1 |
1.3 |
El. motor |
11/15 |
0.64х0.81х0.86 |
250 |
Supply of compressed air to mechanisms and systems |
Aerovik -7.5 |
Air |
0.7 |
0.1 |
1.3 |
El. motor |
7,5/10 |
0.64х0.81х0.86 |
205 |
Supply of compressed air to mechanisms and systems |
Aerovik -5.5 |
Air |
0.57 |
0.1 |
1.3 |
El. motor |
5,5/7,5 |
0.64х0.81х0.86 |
200 |
Supply of compressed air to mechanisms and systems |
*temperature of intake air: 20 deg. C (ISO 1217);
**air pressure: 1 bar